Basic Info.
Max Diameter of Workpiece
Customized
Type
Environmental Test Equipment
Transport Package
Wooden Case
Product Description
Drive-in tempeature humidity vehicle test chamber (automobile test equipment)
Application of drive-in temperature humidity vehicle test chamber, automobile test equipment
Windscreen defrosting and demisting tests for M1 category vehicles;
Windscreen wiper and washer property tests;
Cold start tests for M1 category vehicles and engineers;
Air conditioning system tests for M1 category vehicles;
Property tests for small-size refrigerated trucks;
Environmental tests for M1 category vehicles, small-size trucks, special purpose motor vehicles, motorcycles, engineers and components.
Advantage of drive-in temperature humidity vehicle test chamber, automobile test equipmentThe drive-in vehicle test chamber attained a patent (No. CN103816947B) for its constant temperature and humidity design and air duct structure. Non-uniform heating will directly influence the final results of tests, like sunlight tests and rotary drum test, the testing chamber fixes this problem.
Technical parameter of drive-in temperature humidity vehicle test chamber, automobile test equipment
| Temperature range | -40ºC to +110ºC |
| Temperature fluctuation | ≤±0.5ºC |
| Temperature deviation | ≤±2.0ºC |
| Temperature uniformity | ≤2.0ºC |
| Heat-up time | +20ºC to +110ºC≤150Min |
| Cool-down time | +20ºC to -40ºC≤120Min |
Standards
QC/T 449-2000: Insulation truck-refrigerated truck-performance and test method;
IEC 68-2-1 Test A: Cold (GB2423.1-2001 test A: Low temperature test method);
IEC 68-2-2 Test B: Dry heat (GB2423.2-2001 test B: Low temperature test method);
IEC 68-2-78 test cab: Constant moisture and heat test;
(GB/T2423.3-1993 test B: Constant moisture and heat test);
IEC 68-2-30 test dB: Alternating moisture and heat rest;
(GB/T2423.4-1993 test B: Alternating moisture and heat test);
ES92101-00: Passenger vehicle-head lamp-performance requirements and moisture test;
GB11555-2009: Motor vehicles-windshield demisting and defrosting systems-performance requirements and test method vehicle cold start test.
PV1200/2005, PR308.2 environmental test chamber with solar simulation for auto parts reliability test
Application of PV1200/2005, PR308.2 environmental test chamber with solar simulation
This cabinet is suitable for quality inspection and material screening of electronics, electrical appliances, communication, instruments, vehicles, plastic products, metals, food, chemical, building materials, medical, aerospace and other products;
The test cabinet for automotive interiors, such as IP, DP, Cockpit, CNSL, ashtray, air vents and other components reliability test.
The test cabinet meets PV1200, PV2005, PR308.2, GB/T10586, GB/T10592, GB/T5170.2, GB/T5170.5, etc. Test standards.
Technical advantages PV1200/2005, PR308.2 environmental test chamber with solar simulation
1. Adopted self-developed temperature and humidity controller.
2. Adopted Mitsubishi PLC+ industrial-level man-machine interface, with strong anti-interference, system stable and low failure rate.
3. Man-machine interactive output operation, automatic recording equipment operation data and fault information.
4. Temperature and humidity historical are exported by U disk, and EXCEL format table or BMP format image output, easy to operation.
5. Fault intelligent prompt and corresponding processing method.
6. Adopt PID+ fuzzy control method to save energy.
7. Wide temperature and humidity control range.
Technical Parameters of PV1200/2005, PR308.2 environmental test chamber with solar simulation
| Model | ISTH-SO-306 | ISTH-SO-1000 |
| Volume (L) | 306 | 1000 |
| Inner size(mm) | W | 600 | 1000 |
| H | 600 | 1000 |
| D | 850 | 1000 |
| Temperature range | -70°C~+150°C (180°C is optional) |
| Humidity range | 20%RH~98%RH/(20~85°C) |
| Temperature fluctuation | ±0.5°C |
| Temperature deviation | ±2°C |
| Humidity deviation | ±3.0%RH(>=75%); ±5.0%RH(<=75%) |
| Materia | Shell | Double side electrolysis plank and spraying plastics |
| Inner shell | Stainless steel plate SUS304/2B |
| Thermal insulation | Polyurethane foam fiberboard |
| Regulator | Heater | Nicochrome fin heating tube |
| Humidifier | Stainless steel armored heater humidifying the water pond (humidifying the water pond) |
| Fan | Centrifugal fan |
| Refrigerator | Mechanical compressor |
| Refrigerating fluid | R404A /R23 |
| Refrigerating mode | Mechanical binary cascade refrigeration mode |
| Controller | Display | 7.0 inches TFT color LCD display |
| Operation mode | Program operation fixed value operation |
| Setting mode | Multi language menu, input by touch screen |
| Program capacity | Number of editable program: 99 maximum; Step: 999 steps; Cycle number: 99 maximum |
| Setting range | Temperature: Adjust according to the temperature range of the equipment; Humidity: 0% RH - 100% RH (such as humidity function of equipment) |
| Display resolution | Temperature: 0.01°C, time: 0.1min; Humidity: 0.1% RH
(temperature and humidity test equipment) |
| Input | Thermal resistance and thermocouple |
| Control mode | Anti-integration saturation PID |
| Curve recording function | RAM with battery protection it can save the setting value sampling value and sampling time of equipment; And the maximum recording time is 350 days (when the sampling period is 1.5 min) |
| Water supply | Water supply mode | Lifting by water pump |
| Water storage tank | ( Drawer water tank self-control) |
| Water quality | Resistance rate≥500Ωm |
| Power | AC380V±10%V 50Hz three phase four wire protection ground wire / AC220V / AC110V 60Hz or customized |
Note: The chamber of size can be costomized.
Reference Standards
*PV-1200
*PV-2005
*PR308
*MS210-05
*M0131
*IEC60068-2-1.1990 Test Methods for Low Temperature Test Chambers;
*IEC60068-2-2.1974 Test Methods for High Temperature Test Chambers;
Thermal shock test chamber (2-Zones Thermal shock test chamber)
Product purpose
The equipment is suitable for each kind of electronic product and other product; And the parts and materials are subjected to high/ low temperature constant and each kind of temperature impact and temperature quick change reliability test.
Technical Parameters of thermal shock test chamber
| Model | Temperature range | Bucket size(W*H*D) mm |
| TST-11-A | High temperature: +60~+200ºC | 320*148*230 |
| Low temperature: -40~0ºC |
| TST-11-B | High temperature: +60~+200ºC | 320*148*230 |
| Low temperature: -55~0ºC |
| TST-11-D | High temperature: +60~+200ºC | 320*148*230 |
| Low temperature: -65~0ºC |
| TST-45-A | High temperature: +60~+200ºC | 350*300*308 |
| Low temperature: -40~0ºC |
| TST-45-B | High temperature: +60~+200ºC | 350*300*308 |
| Low temperature: -55~0ºC |
| TST-45-D | High temperature: +60~+200ºC | 350*300*308 |
| Low temperature: -65~0ºC |
| TST-45-A | High temperature: +60~+200ºC | 510*510*510 |
| Low temperature: -40~0ºC |
| TST-45-B | High temperature: +60~+200ºC | 510*510*510 |
| Low temperature: -55~0ºC |
| TST-45-D | High temperature: +60~+200ºC | 510*510*510 |
| Low temperature: -65~0ºC |
Reference Standards
*GB/T2423.1-2008 Test A: Low Temperature Test Method
*GB/T2423.2-2008 Test B: High Temperature Test Method
*GB/T2423.22-2002 Test N: Low Temperature Test Method
*GJB150.3-1986 High Temperature Test
*GJB150.4-1986 Low Temperature Test
*GJB150.5-1986 Temperature Shock Test Thermal shock test chamber (3-Zones Thermal shock test chamber)
Product purpose
The equipment is suitable for each kind of electronic product and other product; And the parts and materials are subjected to high/ low temperature constant and each kind of temperature impact and temperature quick change reliability test.
Technical Parameters of thermal shock test chamber
| Model | KTS-41A | KTS-41B | KTS-41D | KTS-71A | KTS-71B | KTS-71C | KTS-110A | KTS-110B | KTS-110D | KTS-301A | KTS-301B | KTS-3011D |
| Temperature range of test chamber | +60~+200°C | +60~+200°C | +60~+200°C | +60~+200°C |
| -40~+0°C | -55~+0°C | -65~+0°C | -40~+0°C | -55~+0°C | -65~+0°C | -40~+0°C | -55~+0°C | -65~+0°C | -40~+0°C | -55~+0°C | -65~+0°C |
| Cooling mode | Wind cooling or water cooling optional |
| Temperature recovery condition | High temperature exposure | + 150ºC 30min |
| Normal temperature exposure | 5 min |
| Low temperature exposure | -40ºC 30min | -55ºC 30min | -65ºC 30min | -40ºC 30min | -55ºC 30min | -65ºC 30min | -40ºC 30min | -55ºC 30min | -65ºC 30min | -40ºC 30min | -55ºC 30min | -65ºC 30min |
| Temperature recovery time | 5 min |
| Inner size(mm) | W | 240 | 410 | 650 | 970 |
| H | 460 | 460 | 460 | 460 |
| D | 370 | 370 | 370 | 670 |
| External size (mm) | W | 1300 | 1300 | 1500 | 1500 | 1720 | 1720 | 2050 | 2050 |
| H | 1900 | 1900 | 1900 | 1900 | 1900 | 1900 | 1900 | 1900 |
| D | 1700 | 1800 | 1700 | 1800 | 1800 | 1900 | 2100 | 2200 |
| Sample | 2.5KG | 5KG | 10KG | 24KG |
| Power | AC380±10% three phase and four wire protection ground wire) / AC220V /AC110 50Hz / 60Hz |
| Compressed air | 0.4~0.7MPa |
| Water pressure | 0.2~0.5MPa |
*GB/T2423.1-2008 Test A: Low Temperature Test Method;
*GB/T2423.2-2008 Test B: High Temperature Test Method;
*GB/T2423.22-2002 Test N: Low Temperature Test Method;
*GJB150.3-1986 High Temperature Test;
*GJB150.4-1986 Low Temperature Test;
*GJB150.5-1986 Temperature Shock Test.
Bench-top type temperature (&humidity) test chamber
Product purpose of bench-top type temperature (&humidity) test chamber
It is suitable for moisture and temperature constant test of electrician, electronic parts and materials.
Technical Parameters of bench-top type temperature (&humidity) test chamber
| Model | ST(H)-221 | ST(H)-621 |
| Internal size (W*H*D) mm | 300*300*250 | 400*400*400 |
External size (W*H*D) mm
(including projecting portion ) | 450*775*1045 | 550*875*1195 |
| Temperature range | -20°C~+150°C |
| Humidity range | 20%RH~98%RH/(20~85°C) |
| Temperature fluctuation | ±0.25°C |
| Temperature deviation | ±1.5°C |
| Humidity deviation | ±3.0%RH(75% ) ±5.0%RH(<=75% ) |
| Heat up time | -40°C ~20°C about 20mins≥3°C /min. |
| Pull down time | 20°C~-40°C about 60mins≥1°C /min. |
| Temperature and humidity regulating mode | Balance temperature regulating humidity regulating mode |
| Temperature of using environment | 0~35°C |
| Material | Shell | Double side electrolysis plank and spraying plastics |
| Inner shell | Stainless steel plate SUS304/2B |
| Thermal insulation | Polyurethane foam fiberboard |
| Regulator | Heater | Nicochrome fin heating tube |
| Humidifier | Stainless steel armored heater humidifying the water pond (humidifying the water pond) |
| Fan | Centrifugal fan |
| Refrigerator | Mechanical compressor |
| Refrigerant | HFC R404A/R23 |
| Refrigerating mode | Mechanical binary cascade refrigeration (air cooling or water cooling) |
| Controller | Display | 5.0 inch TFT color LCD display |
| Operation mode | Program operation fixed value operation |
| Setting mode | English menu, input by touch screen |
| Program capacity | Number of editable program 99 maximum; Step 999 steps; Cycle number 99 maximum: : : |
| Setting range | Temperature: Adjust according to the temperature range of the equipment; Humidity: 0% RH - 100% RH (such as humidity function of equipment) |
| Display resolution | Temperature: 0.01°C, time: 0.1min; Humidity: 0.1% RH
(temperature and humidity test equipment) |
| Input | Thermal resistance and thermocouple |
Communication function
( purchasing) | RS 485 interface with local and remote communication function, monitoring software RS-485/RS-232 convertor, one COM interface and one USB interface occupying PC computer; Connect 16 sets of equipment at most; And the maximum accumulated length of the cable is 800M. |
| Control mode | Anti-integration saturation PID |
| Curve recording function | RAM with battery protection it can save the setting value sampling value and sampling time of equipment; And the maximum recording time is 350 days (when the sampling period is 15 min. ) |
| USB function | It is equipped with one U-disk and software disk special for PC computer (applicable for simple and complex Chinese, English WINDOWS operation system); The test program is compiled by PC software and saved in U-disk; And then the test program is tuned out from the U-disk and saved in the controller; Or the controller can be saved in u-disk; And then it is saved in PC computer to be analyzed and managed. The record data of the test curve recorded in the controller can be saved to U-disk; The test data/curve is directly displayed and printed by special software of PC computer; And the data is converted into format file. The recording data of the controller is as follows: Two-circuit temperature - setting temperature and actually measured temperature; Two-circuit humidity - setting humidity and actually measured humidity. |
| Auxiliary function | Fault alarm and reason, treatment prompt function power failure protection function, and upper and lower temperature limit protection function; Calendar timing function, ( automatic starting or automatic stop); Self-diagnostic function |
| Water supply mode | Supply by water pump |
| Water storage tank | Handheld auxiliary water tank |
| Water quality | Resistance rate≤ 500 Ω m |
| Power | AC220V, Frequency: 50±2%Hz, two phase two wire protection ground wire, earthing resistance≤4Ω; Use 2P+N 10A air switch |
| Standard configuration | One observation window (transparent electro thermal film centre control glass);
One Ф50mm wire hole in left and right; Two sets of sample racks, floodlight;
Time accumulator( internal),
Four foot wheels;
One power cable (3m long),
One RS-485/232 interface;
One control terminal of test power
One USB interface and one U disk |
| Safety device | Residual-current circuit breaker,
Dry burning protector (for damp and heat only),
Water system protection device ( for damp and heat only), overheat protection of fan motor, fuse,
Overload short circuit protector of control loop,
Temperature limiting protector,
Under voltage protector of cooling water (for water cooling type only),
Over pressure, over current and overheat protection for compressor,
Phase sequence protection and over current protection of condensate fan for air cooling |
Low pressure temperature test chamber
Application of low pressure temperature test chamber
The temperature low pressure test chamber is often used for military uses. Sometimes, the low pressure chamber simulates the high mountain environment for testing vehicles, computers, electronic components and packaging materials that need air transport.
Product purpose of low pressure temperature test chamber
Apart from the military applications, the high and low temperature/ low air pressure test chamber (low air pressure test chamber) is used for car test under mountain environment and testing the airborne computer, electronic element and package.
Technical Parameters of low pressure temperature test chamber
| Model | KU-504-40 | KU-1000-40 | KU-504-70 | KU-1000-70 |
| Volume (L) | 504L | 1000L | 504L | 1000L |
| Inner size (DxWxH)mm | 800X700X900 | 1000X1000X1000 | 800X700X900 | 1000X1000X1000 |
| Temperature range | -40°C~+150°C | -70°C~+150°C |
| Temperature fluctuation | ±1.5°C |
| Temperature deviation | ≥ 100°C, ±3.0°C(Normal pressure no-load), < 100°C, ±2.0°C(Normal pressure no-load) |
| Warm-up time | (0.7°C ~1.0°C /Min )(Total average) |
| Pressure range | Normal pressure ~1 kpa |
| Pressure deviation | ≥40kpa, ±2kpa; 4kpa~40kpa, ±0.5kpa; ≤4kpa, ±0.1kpa |
| Rate of pressure reduction | Normal pressure~1 kpa (Under the state of normal temperature) |
| Pressure recovery rate | 10kpa/Min (adjustable) |
| Material | Shell | Anti -rust cold rolled sheet steel (surface spraying plastics) |
| Inner shell | Stainless steel plate SUS304 |
| Pressure bearing - material | Anti-rust high-quality thick steel plate (surface spraying plastics) |
| Thermalinsulation | High-quality glass cotton |
| Regulatr | Refrigerator | Semi-hermetic compressor |
| Cooling mode | Air cooling or Water cooling |
| Vacuum pumping mode | Mechanical rotary-vane vacuum pump |
| Heater | High-quality nickel-chromium alloy fin heater |
| Fan | Magnetic drive motor |
| Door observation window | Hollow glass of circular observation window heating film |
| Temperature sensor | Thermal resistance and thermocouple |
| Controller | Touch screen controller |
| Standard configuration | Observation window, testing hole (1 at left side), plate, plate frame(2 sets) |
| Safety device | Over-temperature protection, oil lacking, over-voltage, overload protection of compressor, fan overload protection, power phase loss protection, leakage protection, water lacking protection (water cooling) and vacuum pump fault alarm |
| Selection | Recorder added plate and special sample rack |
Remarks: Select the low air pressure and low temperature equipment(our ompany has technical ability to meet the requirement of temperature and umidityunder low air temperature)
Note: Our company has the technological capacity to simultaneously satisfy the temperature requirements and humidity requirement under low pressure.
Optional configurations - Rotary dehumidifier/ polymeric membrane, with a lowest temperature/humidity content of 5ºC/5%RH.
- Built-in tempered glass door, easy to move.
- Water purification system, with automatic replenishment function.
- Recorder, save and print testing data.
- Ultrasonic humidifier/high-pressure spray humidifier, providing continuous high humidity under extreme temperature.
- Dry air blow system, anti-condensation
- Remote monitoring function, cellphone and computer supportive.
What we can support:
About Simplewell:
Address:
Shuixin Road, Dalang Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Chemicals, Electrical & Electronics, Furniture, Industrial Equipment & Components, Instruments & Meters, Textile
Management System Certification:
ISO 9001
Company Introduction:
Simplewell Technology Co., Ltd is a professional producer of diversified type of testing equipment and devices, with about 10 years of experience, including the simulation environment & reliability test chamber, formaldehyde & VOC volatile gas test equipment, the reliability test equipment for the whole vehicle & components. We skill in R&D capacity and independent design strength, have experiences in the installation for non-normal equipments, we always keep launching new products, develop intellectualized control system to meet the market demands and establish a stellar reputation in the industry.
Our factory has modern advance equipment such as international leading laser cutting machines Japanese AMD numerical control, bending machines and laser beam welding machines. We adopt scientific management mode and philosophy in every step of the product development, manufacture, quality control, customer service and technical support.
The company has passed TUV: ISO9001: 2015 certificate and VDA6.4: 2017 quality management system standards, as well as won lots of invention patens in China, U. S., Japan, Europe etc. Our equipment provides various testing standards, making sure the tested samples and products are compliant with different manufacture requirements. A wide application is mainly applied in institutes, R&D organizations, aviation, military projects, electronics, electrical, toys, furniture, hardware, papermaking, batteries, photo-electricity, communications, automobiles, agriculture and so on.
){kind=link}